← Reading listAgendaReviewdatatracker ↗ draft-mayer-bpm-ioam-gob-00 · none · 24 pp · 2026-11-02 · offline copy



BPM                                                             A. Mayer
Internet-Draft             Univ. of Rome Tor Vergata / CNIT / Common Net
Intended status: Experimental                                 S. Salsano
Expires: 3 May 2027                     Univ. of Rome Tor Vergata / CNIT
                                                               J. Iurman
                                                                   6WIND
                                                             D. R. Lopez
                                                              Telefonica
                                                         30 October 2026


        Global Opaque Block for IOAM Pre-allocated Trace Option
                      draft-mayer-bpm-ioam-gob-00

Abstract

   Extensible metadata carried within the IOAM Pre-allocated Trace
   Option (PTO) can support packet-level, flow-level, or path-level
   processing beyond per-node trace data.  This document defines the
   Global Opaque Block (GOB), an extension to the IOAM PTO that
   introduces a single pre-allocated global metadata region placed at
   the tail of the option, after the pre-allocated node data space.
   Since the PTO node data list is populated from the tail of the node
   data space toward its head, under the control of the RemainingLen
   field, legacy IOAM transit nodes can never reach the GOB region: the
   extension is transparent to such nodes by construction, and only the
   decapsulating node or collector needs to be GOB-aware.  In the
   default mode of operation, the GOB carries an explicit length and
   schema identifier in a trailer word; in an optimized namespace-
   implied mode, size and schema are bound to the IOAM-Namespace and the
   block consists of payload only, so that a 4-octet opaque value is
   carried in exactly 4 octets.  The GOB preserves the pre-allocated PTO
   processing model and can be used to transport Extensible In-band
   Processing (EIP) Information Elements or other structured metadata
   formats.

About This Document

   This note is to be removed before publishing as an RFC.

   The latest revision of this draft can be found at https://eip-
   home.github.io/ioam-gob/draft-mayer-bpm-ioam-gob.html.  Status
   information for this document may be found at
   https://datatracker.ietf.org/doc/draft-mayer-bpm-ioam-gob/.

   Discussion of this document takes place on the EIP SIG mailing list
   (mailto:eip@cnit.it), which is archived at http://postino.cnit.it/
   cgi-bin/mailman/private/eip/.



Mayer, et al.              Expires 3 May 2027                   [Page 1]

Internet-Draft                  IOAM GOB                    October 2026


   Source for this draft and an issue tracker can be found at
   https://github.com/eip-home/ioam-gob.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 3 May 2027.

Copyright Notice

   Copyright (c) 2026 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Conventions and Definitions . . . . . . . . . . . . . . . . .   4
   3.  Design Overview . . . . . . . . . . . . . . . . . . . . . . .   5
   4.  GOB Format  . . . . . . . . . . . . . . . . . . . . . . . . .   6
     4.1.  PTO Layout with GOB . . . . . . . . . . . . . . . . . . .   6
     4.2.  G Bit and Ver Field . . . . . . . . . . . . . . . . . . .   6
     4.3.  GOB Trailer Fields  . . . . . . . . . . . . . . . . . . .   7
     4.4.  Byte-Level Layout . . . . . . . . . . . . . . . . . . . .   7
     4.5.  Namespace-Implied GOB . . . . . . . . . . . . . . . . . .  10
   5.  Length and Alignment Rules  . . . . . . . . . . . . . . . . .  11
     5.1.  GOB Length  . . . . . . . . . . . . . . . . . . . . . . .  11
     5.2.  Internal PTO Offsets  . . . . . . . . . . . . . . . . . .  11



Mayer, et al.              Expires 3 May 2027                   [Page 2]

Internet-Draft                  IOAM GOB                    October 2026


     5.3.  IOAM Option Length and Hop-by-Hop Header Length . . . . .  12
     5.4.  Alignment Semantics . . . . . . . . . . . . . . . . . . .  13
     5.5.  Preservation of PTO Semantics . . . . . . . . . . . . . .  14
   6.  Backward Compatibility  . . . . . . . . . . . . . . . . . . .  14
     6.1.  Structural Transparency to Legacy Transit Nodes . . . . .  15
     6.2.  Overflow Behavior . . . . . . . . . . . . . . . . . . . .  15
     6.3.  GOB-Only Mode . . . . . . . . . . . . . . . . . . . . . .  15
     6.4.  Legacy Decapsulating Nodes and Collectors . . . . . . . .  16
     6.5.  Path MTU  . . . . . . . . . . . . . . . . . . . . . . . .  16
     6.6.  Applicability to Namespace-Implied GOBs . . . . . . . . .  16
   7.  Processing Semantics  . . . . . . . . . . . . . . . . . . . .  16
     7.1.  Ingress Node Behavior . . . . . . . . . . . . . . . . . .  16
     7.2.  Transit Node Behavior . . . . . . . . . . . . . . . . . .  17
     7.3.  Egress or Collector Behavior  . . . . . . . . . . . . . .  17
   8.  Relation to PTO Semantics . . . . . . . . . . . . . . . . . .  18
   9.  Schema Semantics and Extensibility  . . . . . . . . . . . . .  18
   10. Integration with EIP  . . . . . . . . . . . . . . . . . . . .  19
   11. Implementation Status . . . . . . . . . . . . . . . . . . . .  20
   12. Security Considerations . . . . . . . . . . . . . . . . . . .  21
   13. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  21
   14. References  . . . . . . . . . . . . . . . . . . . . . . . . .  22
     14.1.  Normative References . . . . . . . . . . . . . . . . . .  22
     14.2.  Informative References . . . . . . . . . . . . . . . . .  23
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  24
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  24

1.  Introduction

   The IOAM Pre-allocated Trace Option (PTO) defined in [RFC9197] and
   [RFC9486] provides a structured way to carry in-band operational and
   telemetry information along a packet path.  In the PTO model, the
   encapsulating node pre-allocates space for node data that can be
   filled by IOAM-capable nodes along the path.

   This document defines an extension to the IOAM PTO called the Global
   Opaque Block (GOB).  The GOB is a global metadata region that appears
   once in the PTO, at the tail of the option, after the pre-allocated
   node data space.  In the default mode of operation, the GOB is
   identified by a presence bit in the PTO header and carries its own
   length and schema fields in the last 4-octet word of the option,
   referred to as the GOB Trailer.  In an optimized namespace-implied
   mode, presence, size and schema of the GOB are bound to the IOAM-
   Namespace, the trailer is omitted, and the block consists of payload
   only.







Mayer, et al.              Expires 3 May 2027                   [Page 3]

Internet-Draft                  IOAM GOB                    October 2026


   The GOB enables the carriage of structured global metadata within the
   IOAM PTO, while preserving the existing PTO processing model for per-
   node trace data.  In particular, the GOB can carry Extensible In-band
   Processing (EIP) Information Elements or other schema-driven metadata
   formats, without modifying the semantics of the node data list.

   The placement of the GOB at the tail of the option makes it
   transparent to legacy IOAM transit nodes.  In the PTO, the node data
   list is populated from the tail of the pre-allocated node data space
   toward its head, at offsets derived from the RemainingLen field
   (Section 4.4.1 of [RFC9197]).  A compliant legacy node therefore
   never writes beyond the node data space and cannot reach the GOB
   region that follows it.  Only the decapsulating node or the collector
   needs to be GOB-aware.  This property is analyzed in detail in
   Section 6.

   The GOB is pre-allocated by the encapsulating node.  Transit nodes
   MAY read or update the GOB payload, subject to the bounds established
   at encapsulation time, but they MUST NOT alter the overall GOB size
   or the layout of the enclosing PTO option.

   This document specifies the GOB format, length and alignment rules,
   and processing behavior for encapsulating, transit, and egress or
   collector nodes.

   An implementation and experimental evaluation of the proposed GOB
   approach within the Linux IOAM framework are described in Section 11.

2.  Conventions and Definitions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   The following terms are used in this document:

   GOB:  Global Opaque Block.  A structured global metadata region
      inserted into the IOAM PTO.

   GOB Trailer:  The 4-octet trailer of the GOB, carried as the last
      word of the IOAM option and containing the GOB Len and Schema
      fields.

   GOB Payload:  The payload that immediately precedes the GOB Trailer.
      Its size is determined by the GOB Len field.




Mayer, et al.              Expires 3 May 2027                   [Page 4]

Internet-Draft                  IOAM GOB                    October 2026


   Node Data Space:  The pre-allocated region that follows the PTO fixed
      header and hosts the Node Data List.  Its size is set at
      encapsulation time via the RemainingLen field.

   PTO:  The IOAM Pre-allocated Trace Option defined in [RFC9197] and
      [RFC9486].

   Node Data List:  The sequence of pre-allocated per-node data slots
      defined by the PTO format.

   Ingress Node:  The encapsulating node that inserts the IOAM PTO and,
      when present, allocates and initializes the GOB.

   Transit Node:  An IOAM-capable node along the path that may process
      the PTO and may read or update the GOB payload.

   Egress or Collector Node:  A node that removes, terminates, exports,
      or otherwise interprets the IOAM information carried in the
      packet.

   Schema:  A 24-bit identifier that specifies how the GOB Payload is to
      be interpreted.

3.  Design Overview

   The GOB extends the IOAM PTO with a global metadata area that is
   logically distinct from the per-node node data list.  It is intended
   for metadata that applies to the packet, flow, or path as a whole,
   rather than to a specific transit node.

   The GOB appears at most once in a PTO option.  When present, it is
   placed at the tail of the option, after the pre-allocated node data
   space.  The GOB consists of a variable-length payload followed by a
   fixed 4-octet trailer, which is the last word of the IOAM option and
   carries the GOB length and schema identifier.  The GOB is located
   from the end of the option, using the IOAM option length; any padding
   used to align the enclosing Hop-by-Hop Options header lies outside
   the IOAM option and does not affect GOB location.

   The GOB preserves the pre-allocated nature of the PTO model.  The
   ingress node allocates the GOB space at encapsulation time and
   determines its size, its schema, and the overall PTO layout.  GOB-
   aware transit nodes MAY modify the contents of the GOB payload, but
   MUST NOT modify the GOB Trailer.  Legacy transit nodes require no
   modification: they process the node data space according to [RFC9197]
   and never access the GOB.





Mayer, et al.              Expires 3 May 2027                   [Page 5]

Internet-Draft                  IOAM GOB                    October 2026


   The GOB is intended to support structured metadata formats.  One
   relevant use case is the carriage of Extensible In-band Processing
   (EIP) Information Elements, but the mechanism is not restricted to
   EIP and may be used with other schema-driven payload formats.

   The addition of the GOB does not change the semantics of the per-node
   node data list.  The GOB complements the PTO by adding a global
   opaque area while leaving the existing per-node trace structure
   intact.

4.  GOB Format

4.1.  PTO Layout with GOB

   When the Global Opaque Block (GOB) is present, the IOAM Pre-allocated
   Trace Option (PTO) is extended by appending a single GOB at the tail
   of the option, after the pre-allocated Node Data Space.

   The resulting layout is:

   1.  PTO fixed header

   2.  Node Data Space (hosting the Node Data List)

   3.  GOB Payload

   4.  GOB Trailer

   5.  Tail padding, if required to satisfy alignment of the enclosing
       Hop-by-Hop Options header; such padding is outside the IOAM
       option

   The GOB is indicated by the G bit in the PTO fixed header.  If the G
   bit is clear, no GOB is present and PTO processing follows the base
   PTO format.

   The GOB appears at most once in a PTO option.

4.2.  G Bit and Ver Field

   The presence of the GOB is signaled in the last octet of the second
   word of the PTO fixed header, defined as Reserved in [RFC9197].  When
   the GOB extension is in use, this octet is structured as 5 reserved
   bits, followed by a 2-bit Ver field and by the G bit in the least
   significant position.

   G bit:  When set to 1, a GOB is present at the tail of the option.




Mayer, et al.              Expires 3 May 2027                   [Page 6]

Internet-Draft                  IOAM GOB                    October 2026


      When set to 0, no GOB is present and the option follows the base
      PTO format.

   Ver:  A 2-bit field carrying the version of the GOB extension.  This
      document defines version 0.  An encapsulating node inserting a GOB
      MUST set Ver to 0.  A GOB-aware node that receives a PTO with the
      G bit set and an unsupported Ver value MUST NOT parse or modify
      the GOB.

   The remaining 5 bits are reserved: they MUST be set to zero by the
   encapsulating node and ignored on receipt.

4.3.  GOB Trailer Fields

   The GOB Trailer is 4 octets long and contains the following fields:

   GOB Len:  An 8-bit field that specifies the size of the GOB Payload
      in units of 4 octets.

   Schema:  A 24-bit field that identifies the format of the GOB
      Payload.  The value 0xFFFFFF indicates that no schema is
      associated with the GOB; in this case, the GOB Payload MUST NOT be
      interpreted.  This mirrors the corresponding rule for the Opaque
      State Snapshot Schema ID in [RFC9197].  The structure of the
      Schema value space is defined in Section 9.

   The total size of the GOB is therefore:

   GOB_PLEN = GOB_Len * 4
   GOB_SIZE = 4 + GOB_PLEN

   where the 4 additional octets correspond to the GOB Trailer itself.
   The GOB Payload consists of the GOB_PLEN octets that immediately
   precede the GOB Trailer.

   The Schema field allows the GOB Payload to be interpreted according
   to a structured format.  One important use case is the carriage of
   Extensible In-band Processing (EIP) Information Elements, but the GOB
   is not limited to EIP and may carry other schema-driven metadata
   formats.

4.4.  Byte-Level Layout

   The following figure shows the byte-level layout of the IOAM PTO with
   the GOB present.






Mayer, et al.              Expires 3 May 2027                   [Page 7]

Internet-Draft                  IOAM GOB                    October 2026


Offset      0                   1                   2                   3
            0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
     40    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |   Next Header |  Hdr Ext Len  |   PadN Opt    | PadN OptLen   |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |    Opt Type   |  IOAM Opt Len |   Reserved    |   IOAM Type   |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |  Namespace-ID  (16b)          |NodeLen  | Flags |RemainingLen |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |         IOAM Trace-Type (24b)                 |Reserved |Ver|G|
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |                                                               |
           ~                          Node Data List                       ~
           |                                                               |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |                                                               |
           ~                           GOB Payload                         ~
           |                                                               |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           | GOB Len (8b)  | Schema (24b)                                  |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |                           Padding                             |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

    Figure 1: IOAM PTO with Global Opaque Block (GOB) at the tail

   More explicitly, the internal structure is:
























Mayer, et al.              Expires 3 May 2027                   [Page 8]

Internet-Draft                  IOAM GOB                    October 2026


Offset      0                   1                   2                   3
            0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
     40    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |   Next Header |  Hdr Ext Len  |   PadN Opt    | PadN OptLen   |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |    Opt Type   |  IOAM Opt Len |   Reserved    |   IOAM Type   |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
           |  Namespace-ID  (16b)          |NodeLen  | Flags |RemainingLen | |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ (A)
           |         IOAM Trace-Type (24b)                 |Reserved |Ver|G| |
     X     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
           |                                                               | |
           |                       Node Data List [0]                      | |
           |                                                               | |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ D
           |                                                               | a
           |                       Node Data List [1]                      | t
           |                                                               | a
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           ~                              ...                              ~ S
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ p
           |                                                               | a
           |                      Node Data List [n-1]                     | c
           |                                                               | e
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
           |                                                               | |
           |                       Node Data List [n]                      | |
           |                                                               | |
     Y     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
           |                                                               | G
           ~                           GOB Payload                         ~ O
           |                                                               | B
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
  GOB_TRL  | GOB Len (8b)  | Schema (24b)                                  |
     Y'    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
           |   PadN Opt    | PadN OptLen   |  Padding 16 bits              |
           +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 ALG(Y',8) \_________________________8-byte aligned ________________________/
   = Y''

   Figure 2: Detailed PTO layout with Node Data Space and tail GOB










Mayer, et al.              Expires 3 May 2027                   [Page 9]

Internet-Draft                  IOAM GOB                    October 2026


   The Node Data Space begins immediately after the PTO fixed header, at
   the same position as in the base PTO format: this is the write anchor
   used by all nodes, including legacy ones, to derive the node data
   recording offset from RemainingLen.  The GOB Payload immediately
   follows the Node Data Space.  The GOB Trailer is the last 4-octet
   word of the IOAM option.  Any final tail padding is added only to
   satisfy alignment requirements of the enclosing Hop-by-Hop Options
   header and lies outside the IOAM option.

4.5.  Namespace-Implied GOB

   The mechanism defined in the previous sections is self-describing:
   the presence of the GOB is signaled by the G bit, and its size and
   schema are carried in the GOB Trailer.  This is the default mode of
   operation.

   As an optimization, a deployment MAY designate IOAM-Namespaces that
   imply the presence and the format of a GOB, referred to as GOB-
   implying namespaces.  When the Namespace-ID field of the PTO carries
   such a value:

   *  the option carries a GOB at the tail consisting of payload only:
      the GOB Trailer is NOT present;

   *  the GOB size is implied by the namespace, through configuration or
      through the registration of the Namespace-ID value; it MUST be a
      multiple of 4 octets, and the sizes of 4, 8, 12 and 16 octets are
      RECOMMENDED for standardized registrations;

   *  the schema of the GOB payload is likewise implied by the
      namespace;

   *  the presence of the GOB is determined by the Namespace-ID itself:
      a GOB-aware node MUST treat the GOB as present regardless of the
      value of the G bit.  The encapsulating node SHOULD set the G bit
      to 1 (and the Ver field to 0) as an in-band confirmation when the
      deployment uses the Reserved octet extension of Section 4.2;
      alternatively, it MAY leave the Reserved octet at zero, obtaining
      a pure namespace-based mode of operation that does not use the
      Reserved octet at all.

   In this mode, the GOB occupies the last GOB_SIZE octets of the IOAM
   option, where GOB_SIZE is the implied size, and the validity check of
   Section 5.2 applies with the implied GOB_SIZE substituted for 4 *
   (GOB_Len + 1).  All other processing rules apply unchanged, with
   presence, size and schema derived from a Namespace-ID lookup instead
   of being parsed from the packet.




Mayer, et al.              Expires 3 May 2027                  [Page 10]

Internet-Draft                  IOAM GOB                    October 2026


   The namespace-implied mode is intended for standardized compact
   records and for hardware fast paths: the position and interpretation
   of the GOB are derived from a single Namespace-ID lookup, without
   parsing any length information in the packet, and the per-packet
   overhead of the trailer is removed entirely.  In particular, a
   4-octet opaque value is carried in exactly 4 octets, which is the
   most efficient possible transport for it; a 16-octet record is
   carried in 16 octets.  Note that the fields defined by [RFC9197] keep
   their format and semantics regardless of the namespace value: the
   namespace only provides the interpretation context for octets that
   lie outside all such fields.  In particular, in the pure namespace-
   based variant, with the Reserved octet left at zero, the option is,
   on the wire, a plain Pre-allocated Trace Option whose pre-allocated
   space extends beyond the RemainingLen window: this variant can be
   deployed without any change to [RFC9197].

5.  Length and Alignment Rules

   This section defines the length relations used when the GOB is
   present in the IOAM PTO.

5.1.  GOB Length

   The GOB Payload length is determined by the GOB Len field:

   GOB_PLEN = GOB_Len * 4

   The total GOB size, including the fixed 4-octet GOB Trailer, is:

   GOB_SIZE = 4 + GOB_PLEN

   The GOB Len field is set by the ingress node at encapsulation time.

   Transit nodes MAY modify the content of the GOB Payload, but MUST NOT
   modify the GOB Trailer and therefore MUST NOT alter the total GOB
   size.

5.2.  Internal PTO Offsets

   Let:

   *  X be the offset of the start of the Node Data Space, immediately
      following the PTO fixed header;

   *  Y be the offset immediately following the Node Data Space;

   *  Y' be the offset immediately following the GOB Trailer, that is,
      the end of the IOAM option;



Mayer, et al.              Expires 3 May 2027                  [Page 11]

Internet-Draft                  IOAM GOB                    October 2026


   *  Y'' be the IOAM option length rounded up to the next multiple of 8
      octets;

   *  RemainingLen_init be the initial value of the RemainingLen field,
      set by the ingress node at encapsulation time.

   Then:

   X   = (sizeof(IOAM_TLV) - 2) + sizeof(IOAM_PTO_HDR)
   Y   = X + RemainingLen_init * 4
   Y'  = Y + GOB_SIZE
   Y'' = ALIGN(Y', 8)

   In these expressions:

   *  sizeof(IOAM_TLV) - 2 excludes the Option Type and Option Length
      octets already accounted for in the option layout;

   *  sizeof(IOAM_PTO_HDR) is the fixed PTO header size;

   *  RemainingLen retains its exact meaning from [RFC9197]: it counts
      only the pre-allocated Node Data Space and does not include the
      GOB.

   The Node Data Space starts immediately after the PTO fixed header and
   spans RemainingLen_init * 4 octets.  The GOB occupies the last
   GOB_SIZE octets of the IOAM option.

   Let PTO_LEN be the total length of the PTO option content, from the
   beginning of the PTO fixed header to the end of the GOB Trailer, and
   let RemainingLen be the current (received) value of the field.  The
   following validity check holds for a well-formed option at any point
   along the path:

   4 * (GOB_Len + 1) <= PTO_LEN - sizeof(IOAM_PTO_HDR)
                        - RemainingLen * 4

   The check holds with equality at encapsulation time and is preserved
   along the path, since RemainingLen can only decrease.  A GOB-aware
   node MUST treat the GOB as invalid if this check fails.

5.3.  IOAM Option Length and Hop-by-Hop Header Length

   The IOAM Option Length field MUST be set to Y'', that is, to the
   total internal length of the IOAM option after rounding up to the
   required alignment.





Mayer, et al.              Expires 3 May 2027                  [Page 12]

Internet-Draft                  IOAM GOB                    October 2026


   The enclosing Hop-by-Hop Options header length is derived from the
   total size of the header, including:

   *  the 2-octet Next Header and Hdr Ext Len fields;

   *  any PadN option used to align the start of the IOAM option;

   *  the IOAM option itself, including any final tail padding.

   Let HBH_LEN denote the total Hop-by-Hop Options header size in
   octets.  Then:

   HBH_LEN = ALIGN(4 + sizeof(IOAM_PTO_HDR) + RemainingLen_init * 4
                   + GOB_SIZE, 8)

   where the leading 4 octets account for:

   *  2 octets for Next Header and Hdr Ext Len;

   *  2 octets for the PadN option that aligns the IOAM option start.

   The IPv6 Hdr Ext Len field is encoded as:

   Hdr Ext Len = HBH_LEN / 8 - 1

5.4.  Alignment Semantics

   As specified in [RFC8200], the Hop-by-Hop Options header is encoded
   so that its total length is a multiple of 8 octets, and the Hdr Ext
   Len field carries that length in 8-octet units, not including the
   first 8 octets.

   The final tail padding used to align the enclosing Hop-by-Hop Options
   header to an 8-octet boundary is not part of the GOB and is not part
   of the Node Data List.

   More specifically:

   *  Y identifies the end of the Node Data Space;

   *  Y' identifies the end of the GOB and of the IOAM option;

   *  Y'' identifies the aligned end, including padding that lies
      outside the IOAM option.







Mayer, et al.              Expires 3 May 2027                  [Page 13]

Internet-Draft                  IOAM GOB                    October 2026


   The difference between Y' and Y'' is due only to final alignment
   padding and does not carry GOB or node-data semantics.  The GOB is
   always located relative to the end of the IOAM option as given by the
   IOAM option length, never relative to the end of the Hop-by-Hop
   Options header.

5.5.  Preservation of PTO Semantics

   The presence of the GOB does not alter the semantics of RemainingLen
   or the pre-allocated nature of the PTO.  In particular, RemainingLen
   counts only the Node Data Space, exactly as in [RFC9197], and the
   Node Data Space starts at the same offset as in the base PTO format.

   The ingress node determines, at encapsulation time:

   *  the size of the Node Data Space, via RemainingLen_init;

   *  the GOB size;

   *  the final aligned IOAM option length.

   The following budget constraints apply:

   *  RemainingLen_init <= 127, due to the 7-bit RemainingLen field;
      note that the GOB does not consume this budget;

   *  the total PTO option content, sizeof(IOAM_PTO_HDR) +
      RemainingLen_init * 4 + GOB_SIZE, is bounded by the length limits
      of the enclosing encapsulation (approximately 253 octets for the
      IPv6 Hop-by-Hop encapsulation of [RFC9486]).

   Transit nodes operate only within the pre-allocated bounds of the
   Node Data Space and, for GOB-aware nodes, of the GOB Payload, and
   MUST NOT change the overall layout of the PTO option.

   In this way, the pre-allocated model of the PTO is preserved while
   extending the option with a structured global metadata region.

6.  Backward Compatibility

   This section shows that the GOB is transparent to legacy IOAM transit
   nodes, that is, nodes that implement [RFC9197] without GOB support.









Mayer, et al.              Expires 3 May 2027                  [Page 14]

Internet-Draft                  IOAM GOB                    October 2026


6.1.  Structural Transparency to Legacy Transit Nodes

   In the Pre-allocated Trace-Option, the node data list is populated
   from the tail of the data space toward its head.  Section 4.4.1 of
   [RFC9197] specifies that RemainingLen "is used to derive the offset
   in data space to record the node data element", and that "the
   recording of the node data element would start from RemainingLen -
   NodeLen - size of (opaque snapshot) in 4-octet units".

   A compliant transit node therefore only writes within the interval:

   [X + (RemainingLen - NodeLen - SoS) * 4, X + RemainingLen * 4)

   where X is the start of the data space (Section 5.2) and SoS is the
   size of the Opaque State Snapshot, if present.  Since RemainingLen
   starts at RemainingLen_init and can only decrease, no compliant node
   can ever write at or beyond X + RemainingLen_init * 4, which is
   exactly where the GOB begins.  The GOB is therefore unreachable by
   legacy transit nodes, for any number of IOAM hops on the path.

6.2.  Overflow Behavior

   When a transit node finds that RemainingLen is smaller than the space
   required for its node data element, it sets the Overflow bit (O-bit)
   and does not record any data ([RFC9197]).  With the GOB at the tail
   of the option, this behavior is preserved exactly: overflow is
   signaled precisely when the Node Data Space is exhausted, and the GOB
   is not affected.  The ingress node SHOULD set RemainingLen_init = h *
   NodeLen for the expected number h of IOAM-capable hops; if the path
   contains more IOAM hops than expected, the additional hops do not
   record data and the O-bit is set, while the GOB remains intact.

   The use of the variable-length Opaque State Snapshot (bit 22 of the
   IOAM Trace-Type) consumes RemainingLen faster than the fixed NodeLen
   accounting and thus affects the dimensioning of RemainingLen_init,
   but does not affect the integrity of the GOB.

6.3.  GOB-Only Mode

   An ingress node MAY set RemainingLen_init = 0, resulting in an option
   that carries only the GOB and no node data.  In this case, a legacy
   IOAM transit node finds no room for its node data element and sets
   the O-bit (or skips the option); the GOB is not affected.








Mayer, et al.              Expires 3 May 2027                  [Page 15]

Internet-Draft                  IOAM GOB                    October 2026


6.4.  Legacy Decapsulating Nodes and Collectors

   A legacy decapsulating node removes the whole IOAM option; the GOB is
   lost but packet forwarding is unaffected.  A legacy collector that
   parses the raw option content and assumes that node data extends to
   the end of the option would misinterpret the GOB as the oldest node
   data elements.  Within a GOB deployment domain, the decapsulating
   node and the collector are GOB-aware by definition, so this situation
   only arises from misconfiguration.  Note that, in that case, the size
   of the region interpreted as node data would generally not be an
   integer multiple of NodeLen * 4, which provides a detection
   opportunity.

6.5.  Path MTU

   Section 4.4.1 of [RFC9197] relates RemainingLen to the path MTU for
   the node data space.  An ingress node inserting a GOB MUST also
   account for GOB_SIZE octets when assessing path MTU constraints.

6.6.  Applicability to Namespace-Implied GOBs

   The analysis in this section applies unchanged to the namespace-
   implied mode of Section 4.5: the GOB occupies the same tail region,
   outside the RemainingLen window, regardless of whether its size is
   described by the GOB Trailer or implied by the IOAM-Namespace.  In
   the pure namespace-based variant, with the Reserved octet left at
   zero, the option is additionally fully compliant with [RFC9197] as
   currently specified.

7.  Processing Semantics

   This section specifies the behavior for the default, trailer-based
   mode of operation.  In the namespace-implied mode, the same rules
   apply with the adjustments specified in Section 4.5: the presence of
   the GOB is determined by the Namespace-ID (with the G bit as optional
   in-band confirmation), its size and schema are derived from the
   Namespace-ID, and the GOB Trailer is absent.

7.1.  Ingress Node Behavior

   An ingress node that inserts a GOB into the PTO:

   *  MUST set the G bit to 1 and the Ver field to 0;

   *  MUST allocate the full GOB space (Payload and Trailer) at the tail
      of the option at encapsulation time;

   *  MUST set the GOB Len and Schema fields in the GOB Trailer;



Mayer, et al.              Expires 3 May 2027                  [Page 16]

Internet-Draft                  IOAM GOB                    October 2026


   *  MUST set RemainingLen_init according to the size of the Node Data
      Space only, without including the GOB (e.g., RemainingLen_init = h
      * NodeLen for h expected IOAM hops);

   *  MUST determine the final PTO layout, including the Node Data
      Space, the GOB, and any required tail padding;

   *  MUST account for the GOB size when assessing path MTU constraints.

   The ingress node MAY initialize the GOB Payload with structured
   metadata, zero values, or other schema-defined initial content.

7.2.  Transit Node Behavior

   Legacy IOAM transit nodes require no modification: they process the
   Node Data Space according to the procedures of [RFC9197] and, as
   shown in Section 6, never access the GOB.

   A GOB-aware transit node that processes a PTO containing a GOB:

   *  MUST verify the validity check of Section 5.2 before accessing the
      GOB;

   *  MAY read the GOB Payload;

   *  MAY update fields within the GOB Payload, subject to the schema in
      use;

   *  MUST NOT modify the GOB Trailer (GOB Len and Schema fields);

   *  MUST NOT modify PTO fixed-header fields, other than Flags and
      RemainingLen as allowed by [RFC9197];

   *  MUST NOT change the overall size or layout of the PTO option.

   A transit node MUST confine any GOB update to the pre-allocated GOB
   Payload bounds established by the ingress node.

7.3.  Egress or Collector Behavior

   An egress or collector node that processes a PTO with the G bit set
   locates the GOB Trailer as the last 4-octet word of the IOAM option,
   and the GOB Payload as the GOB_PLEN octets that immediately precede
   it.  The node data recorded along the path occupies the region
   between X + RemainingLen * 4, where RemainingLen is the received
   value, and the start of the GOB Payload.

   Such a node:



Mayer, et al.              Expires 3 May 2027                  [Page 17]

Internet-Draft                  IOAM GOB                    October 2026


   *  MUST verify the validity check of Section 5.2; if the check fails,
      the GOB MUST be considered invalid and MUST NOT be parsed;

   *  MAY parse the GOB Payload according to the Schema field;

   *  MAY export the GOB content as structured metadata or as raw bytes;

   *  MAY ignore the GOB Payload if the Schema value is unknown or not
      supported.

   If the Schema value is unknown, the node MUST NOT infer semantics
   beyond the presence and length of the GOB.

8.  Relation to PTO Semantics

   The GOB preserves the pre-allocated semantics of the IOAM PTO.

   The ingress node continues to determine the overall PTO allocation at
   encapsulation time.  This includes the size of the node data list
   and, when present, the size of the GOB.  Transit nodes operate only
   within the pre-allocated space and do not change the overall layout
   of the PTO.

   The Node Data List retains its existing semantics and processing
   model.  The GOB does not redefine the per-node trace data structure
   and does not replace the node data list.  Instead, it introduces a
   distinct global metadata region placed after the node data space, at
   the tail of the option.

   In this sense, the pre-allocated nature of the PTO applies both to
   the per-node trace space and to the GOB.  The GOB extends the PTO
   with a global opaque area while preserving the original PTO
   processing model.

9.  Schema Semantics and Extensibility

   The Schema field identifies the format of the GOB Payload.  As for
   the Opaque State Snapshot Schema ID of [RFC9197], the Schema field is
   interpreted within the context of the IOAM-Namespace indicated by the
   Namespace-ID field of the enclosing PTO.

   A Schema value may identify:

   *  a sequence of EIP Information Elements;

   *  another structured metadata format defined by a specification;

   *  a locally defined or domain-specific format.



Mayer, et al.              Expires 3 May 2027                  [Page 18]

Internet-Draft                  IOAM GOB                    October 2026


   This document defines the GOB container, but does not define the
   internal syntax of individual schema-specific payloads.  The
   semantics of the GOB Payload therefore depend on the specification
   associated with the Schema value in use.

   Following the model used by [RFC9197] for the Namespace-ID, the
   24-bit Schema value space is divided into two subranges:

   *  an operator-assigned range from 0x000000 to 0x7FFFFF, and

   *  an IANA-assigned range from 0x800000 to 0xFFFFFE.

   The operator-assigned range is domain specific and managed by the
   network operator: values in this range identify locally defined
   schemas, whose meaning is established by configuration within the
   deployment domain and within the context of the IOAM-Namespace in
   use.  No value in this range has a preassigned meaning.

   The IANA-assigned range is intended for globally defined schemas
   specified in future documents, allowing new and interoperable GOB
   payload formats — for example, a registered schema identifying a
   sequence of EIP Information Elements.

   In the namespace-implied mode of Section 4.5, no Schema field is
   carried in the packet: the schema is bound to the IOAM-Namespace by
   configuration or registration, and the rules on the Schema field in
   this section apply to the trailer-based mode only.

   The Schema value 0xFFFFFF is reserved and indicates that no schema is
   associated with the GOB, consistent with the Opaque State Snapshot
   rule of [RFC9197], where "the Schema ID MUST be set to 0xFFFFFF to
   mean no schema".  An encapsulating node that inserts a GOB without an
   associated schema MUST set the Schema field to 0xFFFFFF.  When the
   Schema field is 0xFFFFFF, nodes MUST NOT interpret the GOB Payload
   beyond its presence and length.  Future specifications that define
   allocation policies for Schema values MUST preserve this reservation.

10.  Integration with EIP

   One important use of the GOB is the carriage of Extensible In-band
   Processing (EIP) Information Elements [draft-eip-arch].

   The GOB provides a natural container for EIP within the IOAM PTO
   because it offers a single global metadata region with explicit
   length and schema identification, distinct from the per-node trace
   data.  This makes it suitable for metadata that is flow-level,
   packet-level, or path-level rather than node-local.




Mayer, et al.              Expires 3 May 2027                  [Page 19]

Internet-Draft                  IOAM GOB                    October 2026


   Earlier work explored the integration of EIP into the IOAM framework
   through a different approach based on IOAM data fields
   [salsano25cscn].  The GOB-based approach defined in this document
   provides an alternative integration model based on a pre-allocated
   global metadata region within the PTO.

   The GOB is a general container for structured metadata.  It can carry
   EIP Information Elements, but it is not limited to EIP.

   The GOB-based integration has also been described and experimentally
   evaluated in [mayer26noms].

11.  Implementation Status

   [RFC Editor: please remove this section before publication.]

   This section records the status of known implementations of the
   mechanism defined by this specification, following the approach
   suggested by [RFC7942].

   An open source implementation of the GOB in the Linux kernel IOAM
   subsystem is available and is aligned with the default, trailer-based
   mode of the specification in this document: tail placement of the
   GOB, GOB Trailer as the last word of the option, and unmodified
   RemainingLen semantics.  The namespace-implied mode of Section 4.5 is
   not yet implemented.  The implementation covers encapsulation,
   transit and decapsulation processing, and includes a dedicated eBPF
   program type for programmable processing of the GOB Payload.  The
   eBPF program context exposes only the GOB Payload, so that the GOB
   Trailer is not addressable by the program: the corresponding "MUST
   NOT modify the GOB Trailer" requirement of this document is enforced
   at the eBPF verifier level.

   A complete development and test environment, including build
   instructions and an interactive demonstration of in-flight
   aggregation (minimum, maximum, sum and count of a per-node metric
   carried in the GOB Payload), is available at
   https://github.com/netgroup/ioam-gob-kernel-playground.  The
   demonstration was presented at the IETF 126 hackathon, within the
   project "In-Network Telemetry Aggregation Using new IOAM extensions".

   An earlier implementation and experimental evaluation, based on the
   -01 revision of this document (with the GOB placed at the head of the
   option), is described in [mayer26noms].







Mayer, et al.              Expires 3 May 2027                  [Page 20]

Internet-Draft                  IOAM GOB                    October 2026


12.  Security Considerations

   The GOB introduces a global metadata region that may be read or
   modified by on-path nodes.  Unauthorized access to, or modification
   of, the GOB Payload can affect telemetry interpretation, service
   behavior, or policy enforcement.

   For this reason, deployments of the GOB SHOULD be limited to
   controlled or trusted domains, consistent with the limited-domain
   assumptions often applied to IOAM deployments.

   The GOB Trailer is not protected by any checksum or authentication
   mechanism.  A misbehaving or malicious on-path node could corrupt the
   GOB Trailer; in particular, an inflated GOB Len value could cause a
   decapsulating node to interpret recorded node data as GOB Payload.
   The validity check of Section 5.2 rejects GOB sizes that are
   inconsistent with the option length and with the current RemainingLen
   value, and MUST be applied by every GOB-aware node before parsing the
   GOB.  Deployments MAY additionally cross-check the received GOB Len
   and Schema values against per-namespace configuration.

   The security implications of the GOB Payload also depend on the
   Schema in use.  Some schemas may carry purely observational metadata,
   while others may influence packet treatment or convey more sensitive
   information.  Schema-specific specifications SHOULD describe any
   additional confidentiality, integrity, or authorization requirements.

13.  IANA Considerations

   This document defines the Global Opaque Block (GOB) as an extension
   to the IOAM Pre-allocated Trace Option.

   As discussed in Section 6, the GOB is transparent to legacy IOAM
   transit nodes: it is placed outside the region that such nodes can
   address, and the semantics of all existing PTO fields are preserved.

   In this light, this document proposes to reuse the existing codepoint
   of the IOAM Pre-allocated Trace-Option, defining the G bit and the
   Ver field within the Reserved octet of the PTO fixed header, in the
   positions specified in Section 4.2.  Since [RFC9197] requires transit
   nodes to ignore the Reserved field, this approach does not affect
   legacy transit behavior.  However, [RFC9197] also requires the
   encapsulating node to set the Reserved field to zero: the reuse of
   the PTO codepoint therefore requires a formal update of the
   definition of the Reserved octet of the PTO, allocating its least
   significant bit as the G bit and the two preceding bits as the Ver
   field, while the remaining five bits stay reserved.




Mayer, et al.              Expires 3 May 2027                  [Page 21]

Internet-Draft                  IOAM GOB                    October 2026


   As a subordinate fallback, should the update of the PTO Reserved
   octet definition not be acceptable, a new codepoint can be defined
   for a PTO variant that supports the Global Opaque Block.  In this
   case, the presence or absence of the GOB would still be indicated by
   the G bit, while the use of a distinct codepoint provides explicit
   protocol separation from the current PTO format and avoids any
   redefinition of the existing PTO Reserved octet.  Note, however, that
   this fallback weakens the main benefit of the tail placement: a
   legacy transit node that does not recognize the new codepoint would
   skip the option entirely, instead of processing the node data space
   as it does under the codepoint-reuse approach.

   The namespace-implied mode of Section 4.5 is orthogonal to the choice
   above: it relies on values of the existing "IOAM Namespace-ID"
   registry, where each registered (or operator-configured) GOB-implying
   value specifies the implied GOB size and schema, and it can use the G
   bit as in-band confirmation under whichever of the two approaches is
   selected.  Notably, its pure namespace-based variant, with the
   Reserved octet left at zero, requires neither the update of the
   Reserved octet nor a new codepoint: it can be deployed under
   [RFC9197] as currently specified.  A future version of this document
   may request Namespace-ID registrations for standardized compact
   records.

   In addition, Section 9 divides the 24-bit Schema value space into an
   operator-assigned range (0x000000 to 0x7FFFFF) and an IANA-assigned
   range (0x800000 to 0xFFFFFE), with 0xFFFFFF reserved to indicate that
   no schema is associated with the GOB.  A future version of this
   document is expected to request the creation of a "GOB Schema
   Identifiers" registry covering the IANA-assigned range.

   This version of the document does not request IANA actions.  Future
   versions may request updates to the relevant IOAM [IANA-ioam-types]
   or IPv6 [IANA-ipv6-parameters] registries, depending on which
   standardization approach is selected.

14.  References

14.1.  Normative References

   [IANA-ioam-types]
              IANA, "IOAM Data Field Types", n.d.,
              <https://www.iana.org/assignments/ioam/ioam.xhtml#data-
              field-types>.







Mayer, et al.              Expires 3 May 2027                  [Page 22]

Internet-Draft                  IOAM GOB                    October 2026


   [IANA-ipv6-parameters]
              IANA, "Internet Protocol Version 6 (IPv6) Parameters",
              n.d., <https://www.iana.org/assignments/ipv6-parameters/
              ipv6-parameters.xhtml>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/rfc/rfc2119>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/rfc/rfc8174>.

   [RFC8200]  Deering, S. and R. Hinden, "Internet Protocol, Version 6
              (IPv6) Specification", STD 86, RFC 8200,
              DOI 10.17487/RFC8200, July 2017,
              <https://www.rfc-editor.org/rfc/rfc8200>.

   [RFC9197]  Brockners, F., Ed., Bhandari, S., Ed., and T. Mizrahi,
              Ed., "Data Fields for In Situ Operations, Administration,
              and Maintenance (IOAM)", RFC 9197, DOI 10.17487/RFC9197,
              May 2022, <https://www.rfc-editor.org/rfc/rfc9197>.

   [RFC9486]  Bhandari, S., Ed. and F. Brockners, Ed., "IPv6 Options for
              In Situ Operations, Administration, and Maintenance
              (IOAM)", RFC 9486, DOI 10.17487/RFC9486, September 2023,
              <https://www.rfc-editor.org/rfc/rfc9486>.

14.2.  Informative References

   [draft-eip-arch]
              Salsano, S., ElBakoury, H., and D. R. Lopez, "Extensible
              In-band Processing (EIP) Architecture and Framework",
              Internet-Draft draft-eip-arch, 2026,
              <https://datatracker.ietf.org/doc/draft-eip-arch/>.

   [mayer26noms]
              Mayer, A., Salsano, S., Sidoretti, G., Loreti, P.,
              Bracciale, L., ElBakoury, H., and D. R. Lopez,
              "Integrating the Global Opaque Block into the IOAM
              Framework: A Unified Approach to In-Packet Telemetry and
              Metadata", IEEE/IFIP NOMS 2026, 2026.

   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/rfc/rfc7942>.



Mayer, et al.              Expires 3 May 2027                  [Page 23]

Internet-Draft                  IOAM GOB                    October 2026


   [salsano25cscn]
              Salsano, S., Mayer, A., Sidoretti, G., Loreti, P.,
              Bracciale, L., ElBakoury, H., and D. R. Lopez,
              "Integrating Extensible In-Band Processing (EIP) into the
              IOAM Framework: A Unified Approach to In-Packet Telemetry
              and Metadata", IEEE CSCN 2025 Conference, 2025.

Acknowledgments

   The authors thank Alexander Clemm, Ramon Bister and Severin
   Dellsperger for the discussions on the relationship between the GOB
   and the IOAM Aggregation Trace and Template Options, and for hosting
   the GOB demonstration within their IETF 126 Hackathon project.  The
   authors also thank Giulio Sidoretti for his contribution to the Linux
   implementation.

Authors' Addresses

   Andrea Mayer
   Univ. of Rome Tor Vergata / CNIT / Common Net
   Email: andrea.mayer@uniroma2.it


   Stefano Salsano
   Univ. of Rome Tor Vergata / CNIT
   Email: stefano.salsano@uniroma2.it


   Justin Iurman
   6WIND
   Email: justin.iurman@gmail.com


   Diego R. Lopez
   Telefonica
   Email: diego.r.lopez@telefonica.com















Mayer, et al.              Expires 3 May 2027                  [Page 24]