Workload Identity in Multi System Environments B. Campbell
Internet-Draft Ping Identity
Intended status: Standards Track A. Schwenkschuster
Expires: 28 February 2027 Defakto Security
27 August 2026
WIMSE Workload Proof Token
draft-ietf-wimse-wpt-02
Abstract
The WIMSE architecture defines authentication and authorization for
software workloads in a variety of runtime environments, from basic
deployments to complex multi-service, multi-cloud, multi-tenant
systems. This document specifies the Workload Proof Token (WPT), a
mechanism for workloads to prove possession of the private key
associated with a Workload Identity Token (WIT). The WPT is a signed
JWT that binds the workload's authentication to a specific HTTP
request, providing application-layer proof of possession for
workload-to-workload communication. This specification is designed
to work alongside the WIT credential format defined in draft-ietf-
wimse-workload-creds and can be combined with other WIMSE protocols
in multi-hop call chains.
About This Document
This note is to be removed before publishing as an RFC.
The latest revision of this draft can be found at https://ietf-wg-
wimse.github.io/draft-ietf-wimse-s2s-protocol/draft-ietf-wimse-
wpt.html. Status information for this document may be found at
https://datatracker.ietf.org/doc/draft-ietf-wimse-wpt/.
Discussion of this document takes place on the Workload Identity in
Multi System Environments Working Group mailing list
(mailto:wimse@ietf.org), which is archived at
https://mailarchive.ietf.org/arch/browse/wimse/. Subscribe at
https://www.ietf.org/mailman/listinfo/wimse/.
Source for this draft and an issue tracker can be found at
https://github.com/ietf-wg-wimse/draft-ietf-wimse-s2s-protocol.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Campbell & SchwenkschustExpires 28 February 2027 [Page 1]
Internet-Draft WIMSE Workload-Proof-Token August 2026
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 28 February 2027.
Copyright Notice
Copyright (c) 2026 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Workload Proof Token . . . . . . . . . . . . . . . . . . . . 4
2.1. Error Conditions . . . . . . . . . . . . . . . . . . . . 8
2.2. Coexistence with Bearer Tokens . . . . . . . . . . . . . 9
2.3. Including Additional Claims . . . . . . . . . . . . . . . 10
3. Security Considerations . . . . . . . . . . . . . . . . . . . 10
3.1. Workload Identity Token and Proof of Possession . . . . . 10
3.1.1. Preventing Eavesdropping and Interception with TLS . 11
3.1.2. Limiting Proof of Possession Lifespan . . . . . . . . 11
3.1.3. Limiting Proof of Possession Scope . . . . . . . . . 11
3.1.4. Replay Protection . . . . . . . . . . . . . . . . . . 11
3.1.5. Avoid Logging Raw WPT Values . . . . . . . . . . . . 11
3.1.6. Binding to TLS Endpoint . . . . . . . . . . . . . . . 12
3.1.7. Audience validation . . . . . . . . . . . . . . . . . 12
3.2. Workload Identity Key Management . . . . . . . . . . . . 12
3.3. Middle Boxes . . . . . . . . . . . . . . . . . . . . . . 12
3.4. Privacy Considerations . . . . . . . . . . . . . . . . . 13
4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13
4.1. JSON Web Token Claims . . . . . . . . . . . . . . . . . . 13
4.2. Media Type Registration . . . . . . . . . . . . . . . . . 13
Campbell & SchwenkschustExpires 28 February 2027 [Page 2]
Internet-Draft WIMSE Workload-Proof-Token August 2026
4.2.1. application/wpt+jwt . . . . . . . . . . . . . . . . . 14
4.3. Hypertext Transfer Protocol (HTTP) Authentication Scheme
Registration . . . . . . . . . . . . . . . . . . . . . . 15
5. References . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.1. Normative References . . . . . . . . . . . . . . . . . . 15
5.2. Informative References . . . . . . . . . . . . . . . . . 16
Appendix A. Document History . . . . . . . . . . . . . . . . . . 17
A.1. draft-ietf-wimse-wpt-02 . . . . . . . . . . . . . . . . . 17
A.2. draft-ietf-wimse-wpt-01 . . . . . . . . . . . . . . . . . 18
A.3. draft-ietf-wimse-wpt-00 . . . . . . . . . . . . . . . . . 18
A.4. draft-ietf-wimse-s2s-protocol-07 . . . . . . . . . . . . 18
A.5. draft-ietf-wimse-s2s-protocol-06 . . . . . . . . . . . . 18
A.6. draft-ietf-wimse-s2s-protocol-05 . . . . . . . . . . . . 18
A.7. draft-ietf-wimse-s2s-protocol-04 . . . . . . . . . . . . 19
A.8. draft-ietf-wimse-s2s-protocol-03 . . . . . . . . . . . . 19
A.9. draft-ietf-wimse-s2s-protocol-02 . . . . . . . . . . . . 19
A.10. draft-ietf-wimse-s2s-protocol-01 . . . . . . . . . . . . 19
A.11. draft-ietf-wimse-s2s-protocol-00 . . . . . . . . . . . . 20
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 20
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 20
1. Introduction
This document defines the Workload Proof Token (WPT), a simple,
protocol-independent mechanism for proving possession of the private
key associated with a Workload Identity Token (WIT). The WIT,
defined in [I-D.ietf-wimse-workload-creds], is a credential that
binds a public key to a workload identity and is designed to require
proof of possession - it must not be used as a bearer token. The WPT
provides that proof of possession. The WPT's primary design goal is
simplicity: it is a signed JWT that demonstrates control of the
private key corresponding to the public key in the WIT. By requiring
this cryptographic proof, the WPT significantly reduces the risk of
credential theft and replay attacks compared to bearer token
approaches. The WPT is protocol-agnostic by design. While this
specification provides detailed guidance for HTTP-based usage
(including the WPT HTTP authentication scheme), the core WPT format
is fundamentally a signed JWT that can be adapted to other protocols
including asynchronous messaging systems, event-driven architectures,
and future transport mechanisms. The JWT-based structure allows for
protocol-specific extensions through additional claims while
maintaining core interoperability.
Key characteristics of the WPT include:
Proof of Possession: Demonstrates control of the WIT's associated
private key through a digital signature. Context Binding: Binds the
proof to specific message context through claims such as audience
Campbell & SchwenkschustExpires 28 February 2027 [Page 3]
Internet-Draft WIMSE Workload-Proof-Token August 2026
(aud) and WIT hash (wth). Other tokens in the message can also be
bound (e.g., transaction tokens) to provide unified proof across
different authorization contexts. Short-Lived: Typically valid for
minutes or seconds, limiting replay attack windows. Protocol
Independent: Core format is not tied to any specific transport
protocol.
This specification is part of the WIMSE protocol suite, which
includes credential formats defined in
[I-D.ietf-wimse-workload-creds] and follows the architectural
principles in [I-D.ietf-wimse-arch]. The WPT provides application-
layer proof of possession particularly suited for environments where
transport-layer solutions are insufficient or where communication
patterns span multiple protocols. This document defines the WPT JWT
format, its HTTP usage, validation requirements, and security
considerations. Out of scope are the WIT credential format itself
(covered in [I-D.ietf-wimse-workload-creds]), policy enforcement and
authorization, credential issuance and lifecycle management, detailed
bindings for non-HTTP protocols (to be addressed in future
specifications), and alternative proof-of-possession mechanisms such
as HTTP Message Signatures.
2. Workload Proof Token
The Workload Proof Token (WPT) is a JWT that provides proof of
possession of the private key associated with a Workload Identity
Token (WIT). The Workload Identity Token is sent in the request as
described in [I-D.ietf-wimse-workload-creds]. The WPT is sent in the
Authorization header field (Section 11.6.2 of [RFC9110]) of the
request, using the WPT authentication scheme defined by this
document. The syntax of the credentials of the WPT authentication
scheme uses the token68 syntax defined in Section 11.2 of [RFC9110],
whose ABNF [RFC5234] is repeated in Figure 1 below for ease of
reference. As with any HTTP authentication scheme, the scheme name
is case-insensitive (Section 11.1 of [RFC9110]), while case is
significant in the credentials.
token68 = 1*( ALPHA / DIGIT /
"-" / "." / "_" / "~" / "+" / "/" ) *"="
credentials = "WPT" 1*SP token68
Figure 1: WPT Authentication Scheme ABNF
The credentials are a JWT [RFC7519], whose serialization is a valid
token68, so requests can be parsed by generic HTTP authentication
implementations.
Campbell & SchwenkschustExpires 28 February 2027 [Page 4]
Internet-Draft WIMSE Workload-Proof-Token August 2026
A WPT MUST contain the following:
* in the JOSE header:
- alg: An identifier for an appropriate JWS asymmetric digital
signature algorithm corresponding to the confirmation key in
the associated WIT. The value MUST match the alg value of the
jwk in the cnf claim of the WIT. See
[I-D.ietf-wimse-workload-creds] for valid values and
restrictions.
- typ: the WPT is explicitly typed, as recommended in
Section 3.11 of [RFC8725], using the application/wpt+jwt media
type.
* in the JWT claims:
- aud: The audience SHOULD contain the HTTP target URI
(Section 7.1 of [RFC9110]) of the request to which the WPT is
attached, without query or fragment parts. However, there may
be some normalization, rewriting or other process that requires
the audience to be set to a deployment-specific value.
- exp: The expiration time of the WPT (as defined in
Section 4.1.4 of [RFC7519]). WPT lifetimes MUST be short,
e.g., on the order of minutes or seconds.
- jti: A unique identifier for the WPT. The value MUST be
assigned such that there is a negligible probability that the
same value will be assigned to any other WPT. Such uniqueness
can be accomplished by encoding (base64url or any other
suitable encoding) 128 bits of pseudorandom data.
- wth: Hash of the Workload Identity Token, defined in
[I-D.ietf-wimse-workload-creds]. The value is the base64url
encoding (as defined in Section 2 of [RFC7515]) of the SHA-256
hash of the bytes of the ASCII representation of the WIT's
value.
- tth: Hash of the Txn-Token [I-D.ietf-oauth-transaction-tokens],
if present in the request, which might convey end-user identity
and/or authorization context of the request. The value MUST be
the result of base64url encoding (as defined in Section 2 of
[RFC7515]) the SHA-256 hash of the bytes of the ASCII
representation of the associated token's value.
Campbell & SchwenkschustExpires 28 February 2027 [Page 5]
Internet-Draft WIMSE Workload-Proof-Token August 2026
- oth: Hash(es) of other token(s) in the request that convey end-
user identity and/or authorization context of the request. The
value is a JSON object with a key-value pair for each such
token. For each, in the absence of an application profile
specifying details, the key corresponds to the header field
name containing the token, and the value is the base64url
encoding (as defined in Section 2 of [RFC7515]) of the SHA-256
hash of the bytes of the ASCII representation of the header
field value with any leading or trailing spaces removed. The
header field name MUST be normalized by converting it to all
lower case. Header fields occurring multiple times in the
request are not supported by default. An application profile
may specify different behavior for a key, such as using a
different hash algorithm or means of locating the token in the
request.
To clarify: the tth and oth claims are each mandatory if the
respective tokens are included in the request.
The rules for using non-standard claims in WPTs are documented in
Section 2.3.
An example WPT might look like the following:
=============== NOTE: '\' line wrapping per RFC 8792 ================
eyJhbGciOiJFZERTQSIsInR5cCI6IndwdCtqd3QifQ.eyJhdWQiOiJodHRwczovL3dvc\
mtsb2FkLmV4YW1wbGUuY29tL3BhdGgiLCJleHAiOjE3NDU1MTAwMTYsImp0aSI6Il9fY\
ndjNEVTQzNhY2MyTFRDMS1feCIsInd0aCI6Ilg5d2lQZ3EzamxTR3pBZWdIQ0doTk8xb\
EpnVWJEb0kxTWprYXQ1UUhKQjAifQ.sa5ZYHTeCx4AsurafaBJ2rrMnE7TBHBB47ZUT7\
yoiyz2lcGY5XAnpGPjPnzeRroJJiR7Nr_C5J7mexxrsHM3CQ
Figure 2: Example Workload Proof Token (WPT)
The decoded JOSE header of the WPT from the example above is shown
here:
{
"alg": "EdDSA",
"typ": "wpt+jwt"
}
Figure 3: Example WPT JOSE Header
The decoded JWT claims of the WPT from the example above are shown
here:
Campbell & SchwenkschustExpires 28 February 2027 [Page 6]
Internet-Draft WIMSE Workload-Proof-Token August 2026
{
"aud": "https://workload.example.com/path",
"exp": 1745510016,
"jti": "__bwc4ESC3acc2LTC1-_x",
"wth": "X9wiPgq3jlSGzAegHCGhNO1lJgUbDoI1Mjkat5QHJB0"
}
Figure 4: Example WPT Claims
An example of an HTTP request with both the WIT and WPT from prior
examples is shown below:
=============== NOTE: '\' line wrapping per RFC 8792 ================
POST /path HTTP/1.1
Host: workload.example.com
Content-Type: application/json
Workload-Identity-Token: eyJhbGciOiJFUzI1NiIsImtpZCI6Ikp1bmUgNSIsInR\
5cCI6IndpdCtqd3QifQ.eyJjbmYiOnsiandrIjp7ImFsZyI6IkVkRFNBIiwiY3J2Ijoi\
RWQyNTUxOSIsImt0eSI6Ik9LUCIsIngiOiIxQ1hYdmZsTl9MVlZzSXNZWHNVdkIwM0pt\
bEdXZUNIcVFWdW91Q0Y5MmJnIn19LCJleHAiOjE3NDU1MTI1MTAsImlhdCI6MTc0NTUw\
ODkxMCwianRpIjoieC1fMUNUTDJjY2EzQ1NFNGN3Yl9sIiwic3ViIjoid2ltc2U6Ly9l\
eGFtcGxlLmNvbS9zcGVjaWZpYy13b3JrbG9hZCJ9.ohKJ50QaW8ydALJwaA0Sz4ys3hc\
N_1S-aTZBytMGc3u8QWUmn5uxUDSonoZFAfZk1Ro1kR4vE_xa7mvoE37R-Q
Authorization: WPT eyJhbGciOiJFZERTQSIsInR5cCI6IndwdCtqd3QifQ.eyJhdW\
QiOiJodHRwczovL3dvcmtsb2FkLmV4YW1wbGUuY29tL3BhdGgiLCJleHAiOjE3NDU1MT\
AwMTYsImp0aSI6Il9fYndjNEVTQzNhY2MyTFRDMS1feCIsInd0aCI6Ilg5d2lQZ3Ezam\
xTR3pBZWdIQ0doTk8xbEpnVWJEb0kxTWprYXQ1UUhKQjAifQ.sa5ZYHTeCx4AsurafaB\
J2rrMnE7TBHBB47ZUT7yoiyz2lcGY5XAnpGPjPnzeRroJJiR7Nr_C5J7mexxrsHM3CQ
{"do stuff":"please"}
Figure 5: Example HTTP Request with WIT and WPT
To validate the WPT in the request, the recipient MUST first validate
the WIT as specified in Section 5.1.4 of
[I-D.ietf-wimse-workload-creds], then ensure the following:
* There is exactly one Authorization header field in the request and
it uses the WPT authentication scheme.
* The credentials of the WPT authentication scheme are a single and
well-formed JWT.
* The signature algorithm in the alg JOSE header string-equal
matches the alg attribute of the jwk in the cnf claim of the WIT.
Campbell & SchwenkschustExpires 28 February 2027 [Page 7]
Internet-Draft WIMSE Workload-Proof-Token August 2026
* The WPT signature is valid using the public key from the
confirmation claim of the WIT.
* The typ JOSE header parameter of the WPT conveys a media type of
wpt+jwt.
* The aud claim of the WPT matches the target URI, or an acceptable
alias or normalization thereof, of the HTTP request in which the
WPT was received, ignoring any query and fragment parts.
* The exp claim is present and conveys a time that has not passed.
WPTs with an expiration time unreasonably far in the future SHOULD
be rejected.
* The wth claim is present and matches the hash of the token value
conveyed in the Workload-Identity-Token header.
* It is RECOMMENDED to check that the value of the jti claim has not
been used before in the time window in which the respective WPT
would be considered valid.
* If presented in conjunction with a Txn-Token, the value of the tth
claim matches the hash of that token's value.
* If presented in conjunction with a token conveying end-user
identity or authorization context, the value of the oth claim
matches the hash of that token's value.
* If the oth claim is present, verify the hashes of all tokens
listed in the oth claim per the default behavior defined in
Section 2 or as specified by an application specific profile. If
the oth claim contains entries that are not understood by the
recipient, the WPT MUST be rejected. Conversely, additional
tokens not covered by the oth claim MUST NOT be used by the
recipient to make authorization decisions.
2.1. Error Conditions
Errors may occur during the processing of the WPT. If the validation
fails for any reason, such as an invalid signature, an expired
validity time window, or a malformed data structure, an error is
returned. Because the WPT is conveyed with an HTTP authentication
scheme, a recipient that rejects the request for a reason related to
the WPT SHOULD use the HTTP status code 401 (Unauthorized). Such a
response carries a WWW-Authenticate header field with at least one
challenge, as required by Section 11.6.1 of [RFC9110], and a
recipient that accepts WPTs includes a challenge with the WPT scheme.
This specification defines no authentication parameters for the WPT
Campbell & SchwenkschustExpires 28 February 2027 [Page 8]
Internet-Draft WIMSE Workload-Proof-Token August 2026
challenge. An example of such a response header field is shown
below.
WWW-Authenticate: WPT
Figure 6: Example WPT Challenge
An HTTP status code such as 400 (Bad Request) remains appropriate for
errors that are not related to the presented credentials. Either
response could include more details as per [RFC9457], such as an
indicator that the wrong key material or algorithm was used.
2.2. Coexistence with Bearer Tokens
The WPT occupies the Authorization header field of the request. That
field is defined as Authorization = credentials (Section 11.6.2 of
[RFC9110]); its value is a single set of credentials rather than a
comma-separated list, and a sender therefore MUST NOT generate more
than one Authorization header field (Section 5.3 of [RFC9110]). A
request that presents a WPT consequently cannot present a token with
any other authentication scheme, including the Bearer scheme
(Section 2.1 of [RFC6750]) or the Basic scheme ([RFC7617]).
This exclusivity is intended. A workload that authenticates with a
WIT and a WPT MUST NOT rely on a bearer token presented in the same
request to authenticate the calling workload, and a recipient MUST
NOT use such a token to make authorization decisions about the
caller. A bearer token can be used by anyone who obtains it, so
honoring one alongside a WPT would reduce the strength of the request
to that of its weakest credential and defeat the proof of possession
that the WIT and WPT provide.
Tokens that convey end-user identity or authorization context rather
than the identity of the calling workload are not affected, provided
that they are conveyed in their own header fields. Transaction
tokens [I-D.ietf-oauth-transaction-tokens] are an example: they are
carried in the Txn-Token header field and are explicitly not
permitted in the Authorization header field, precisely so that the
field remains available for authenticating the call itself. Such
tokens are bound to the WPT with the tth and oth claims described in
Section 2. In this case a workload's authorization policy may take
into account both the sending workload's identity and the information
in the context token. For example, the identity in the WIT may be
used to establish which API calls can be made and information in the
context token may be used to determine which specific resources can
be accessed.
Campbell & SchwenkschustExpires 28 February 2027 [Page 9]
Internet-Draft WIMSE Workload-Proof-Token August 2026
The Proxy-Authorization header field (Section 11.7.2 of [RFC9110]) is
a distinct field and is unaffected by the WPT scheme, so a workload
can still authenticate to an intermediary that challenges it. Those
credentials authenticate the sender to that intermediary rather than
to the target workload, are consumed by the intermediary that issued
the challenge, and are not covered by the proof of possession
presented to the target workload. The use of the WPT scheme with
Proxy-Authenticate and Proxy-Authorization is out of scope for this
document.
2.3. Including Additional Claims
The WPT contains JSON structures and therefore can be trivially
extended by adding more claims beyond those defined in the current
specification. This, however, could result in interoperability
issues, which the following rules are addressing.
* To ensure interoperability in WIMSE environments, the use of
Private claim names (Sec. 4.3 of [RFC7519]) is NOT RECOMMENDED.
* In closed environments, deployers MAY freely add claims to the
WPT. Such claims SHOULD be collision-resistant, such as
example.com/myclaim.
* A recipient that does not understand such claims MUST ignore them,
as per Sec. 4 of [RFC7519].
* Outside of closed environments, new claims MUST be registered with
IANA [IANA.JWT.CLAIMS] before they can be used.
3. Security Considerations
3.1. Workload Identity Token and Proof of Possession
The Workload Identity Token (WIT) is bound to a secret cryptographic
key and is always presented with a proof of possession (PoP) as
described in [I-D.ietf-wimse-workload-creds]. The WIT is a general
purpose token that can be presented in multiple contexts. The WIT
and WPT are only used in the application-layer options, and both are
not used in MTLS. The WIT MUST NOT be used as a bearer token. While
this helps reduce the sensitivity of the token it is still possible
that a token and its PoP may be captured and replayed within the
PoP's lifetime. The following are some mitigations for the capture
and reuse of the PoP:
Campbell & SchwenkschustExpires 28 February 2027 [Page 10]
Internet-Draft WIMSE Workload-Proof-Token August 2026
3.1.1. Preventing Eavesdropping and Interception with TLS
An attacker observing or intercepting the communication channel can
view the token and its PoP and attempt to replay it to gain an
advantage. In order to prevent this the token and PoP MUST be sent
over a secure, server authenticated TLS connection unless a secure
channel is provided by some other mechanisms. Host name validation
MUST be performed by the client.
3.1.2. Limiting Proof of Possession Lifespan
The PoP MUST be time limited. A PoP should only be valid over the
time necessary for it to be successfully used for the purpose it is
needed. This will typically be on the order of minutes. PoPs
received outside their validity time MUST be rejected.
3.1.3. Limiting Proof of Possession Scope
In order to reduce the risk of theft and replay the PoP should have a
limited scope. For example, a PoP may be targeted for use with a
specific workload and even a specific transaction to reduce the
impact of a stolen PoP. In some cases a workload may wish to reuse a
PoP for a period of time or have it accepted by multiple target
workloads. A careful analysis is warranted to understand the impacts
to the system if a PoP is disclosed allowing it to be presented by an
attacker along with a captured WIT.
3.1.4. Replay Protection
A PoP includes the jti claim that uniquely identifies it. This claim
SHOULD be used by the receiver to perform basic replay protection,
within the scope of a particular sender, against tokens it has
already seen. Depending upon the design of the system it may be
difficult to synchronize the replay cache across all token
validators. If an attacker can somehow influence the identity of the
validator (e.g. which cluster member receives the message) then
replay protection would not be effective.
3.1.5. Avoid Logging Raw WPT Values
Implementations MUST NOT log raw WPTs by default. Depending on the
aggressiveness of the replay protection mechinism, a WPT harvested
from logs could potentially be replayed and accepted as a legitimate
proof. Implementations should therefore treat WPT values as
sensitive and avoid persisting them in logs.
Campbell & SchwenkschustExpires 28 February 2027 [Page 11]
Internet-Draft WIMSE Workload-Proof-Token August 2026
3.1.6. Binding to TLS Endpoint
The PoP MAY be bound to a transport layer sender such as the client
identity of a TLS session or TLS channel binding parameters. The
mechanisms for binding are outside the scope of this specification.
3.1.7. Audience validation
Validators MUST check that the audience field of the WPT is a URI or
other value that is for their consumption. In some cases when a URI
is used as the audience some information, such as the authority
portion, may be generated by an external requester who sees a
different host name for the service than is used internally.
Validators MUST NOT use untrusted information obtained from the
request to determine if the hostname belongs to an authorized
authority. Doing so could allow attackers to trick validators into
accepting a WPT generated for a different receiver by sending a
fabricated request. The validator MUST get the information about
allowed URL authorities from a trusted source such as out-of-band
configuration. The Host of the request or an "X-Forwarded-Host"
header is an example of untrusted data and cannot be trusted and MUST
NOT be used.
3.2. Workload Identity Key Management
The Workload Identity Token is signed by a private key in possession
of the workload. This private key:
* MUST be kept private
* MUST be individual for each Workload Identifier (see
[I-D.ietf-wimse-arch])
* MUST NOT be used once the Workload Identity Token is expired
* SHOULD be individual for each Workload Identity Token issued
* SHOULD not be reused for other purposes
3.3. Middle Boxes
In some deployments the Workload Identity Token and Workload Proof
Token may pass through multiple systems. The communication between
the systems is over TLS, but the WIT and WPT are available in the
clear at each intermediary. While the intermediary cannot modify the
token or the information within the PoP they can attempt to capture
and replay the token or modify the data not protected by the PoP.
Campbell & SchwenkschustExpires 28 February 2027 [Page 12]
Internet-Draft WIMSE Workload-Proof-Token August 2026
It is important to note that the WPT does not protect major portions
of the request and response and therefore does not provide protection
from an actively malicious middle box. Deployments should perform
analysis on their situation to determine if it is appropriate to
trust and allow traffic to pass through a middle box.
3.4. Privacy Considerations
The Workload Proof Token may contain private information such as user
names or other identities. Care should be taken to prevent the
disclosure of this information. The use of TLS helps protect the
privacy of WITs and PoPs.
The Workload Identifier present in the WPT is typically associated
with a workload and not a specific user, however in some deployments
the workload or the HTTP Target URI may be associated directly to a
user. While these are exceptional cases a deployment should evaluate
if the disclosure of a WPT can be used to track a user.
4. IANA Considerations
4.1. JSON Web Token Claims
IANA is requested to add the following entries to the "JSON Web Token
Claims" registry [IANA.JWT.CLAIMS]:
+============+===================+===================+===========+
| Claim Name | Claim Description | Change Controller | Reference |
+============+===================+===================+===========+
| tth | Transaction Token | IETF | RFC XXX, |
| | hash | | Section 2 |
+------------+-------------------+-------------------+-----------+
| wth | Workload Identity | IETF | RFC XXX, |
| | Token hash | | Section 2 |
+------------+-------------------+-------------------+-----------+
| oth | Other Tokens | IETF | RFC XXX, |
| | hashes | | Section 2 |
+------------+-------------------+-------------------+-----------+
Table 1
4.2. Media Type Registration
IANA is requested to register the following entries to the "Media
Types" registry [IANA.MEDIA.TYPES]:
* application/wpt+jwt, per Section 4.2.1.
Campbell & SchwenkschustExpires 28 February 2027 [Page 13]
Internet-Draft WIMSE Workload-Proof-Token August 2026
4.2.1. application/wpt+jwt
Type name: application
Subtype name: wpt+jwt
Required parameters: N/A
Optional parameters: N/A
Encoding considerations: Encoding considerations are identical to
those specified for the "application/jwt" media type. See [RFC7519].
Security considerations: See the Security Considerations section of
RFC XXX.
Interoperability considerations: N/A
Published specification: RFC XXX, Section 2.
Applications that use this media type: Workloads that use these
tokens to integrity-protect messages in the WIMSE workload-to-
workload protocol.
Fragment identifier considerations: N/A
Additional information:
Deprecated alias names for this type: N/A
Magic number(s): N/A
File extension(s): None
Macintosh file type code(s): N/A
Person & email address to contact for further information:
See the Authors' Addresses section of RFC XXX.
Intended usage: COMMON
Restrictions on usage: N/A
Author: See the Authors' Addresses section of RFC XXX.
Change controller: Internet Engineering Task Force (iesg@ietf.org).
Campbell & SchwenkschustExpires 28 February 2027 [Page 14]
Internet-Draft WIMSE Workload-Proof-Token August 2026
4.3. Hypertext Transfer Protocol (HTTP) Authentication Scheme
Registration
IANA is requested to register the following entry to the "Hypertext
Transfer Protocol (HTTP) Authentication Scheme Registry"
[IANA.HTTP.AUTHSCHEMES]:
* Authentication Scheme Name: WPT
* Reference: RFC XXX, Section 2
* Notes: see reference above for an ABNF syntax of the credentials
of this scheme
5. References
5.1. Normative References
[I-D.ietf-wimse-arch]
Salowey, J. A., Rosomakho, Y., and H. Tschofenig,
"Workload Identity in a Multi System Environment (WIMSE)
Architecture", Work in Progress, Internet-Draft, draft-
ietf-wimse-arch-08, 6 July 2026,
<https://datatracker.ietf.org/doc/html/draft-ietf-wimse-
arch-08>.
[I-D.ietf-wimse-workload-creds]
Campbell, B., Salowey, J. A., Schwenkschuster, A.,
Sheffer, Y., and Y. Rosomakho, "WIMSE Workload
Credentials", Work in Progress, Internet-Draft, draft-
ietf-wimse-workload-creds-02, 2 July 2026,
<https://datatracker.ietf.org/doc/html/draft-ietf-wimse-
workload-creds-02>.
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/rfc/rfc5234>.
[RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web
Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
2015, <https://www.rfc-editor.org/rfc/rfc7515>.
[RFC7517] Jones, M., "JSON Web Key (JWK)", RFC 7517,
DOI 10.17487/RFC7517, May 2015,
<https://www.rfc-editor.org/rfc/rfc7517>.
Campbell & SchwenkschustExpires 28 February 2027 [Page 15]
Internet-Draft WIMSE Workload-Proof-Token August 2026
[RFC7518] Jones, M., "JSON Web Algorithms (JWA)", RFC 7518,
DOI 10.17487/RFC7518, May 2015,
<https://www.rfc-editor.org/rfc/rfc7518>.
[RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
(JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
<https://www.rfc-editor.org/rfc/rfc7519>.
[RFC7800] Jones, M., Bradley, J., and H. Tschofenig, "Proof-of-
Possession Key Semantics for JSON Web Tokens (JWTs)",
RFC 7800, DOI 10.17487/RFC7800, April 2016,
<https://www.rfc-editor.org/rfc/rfc7800>.
[RFC8725] Sheffer, Y., Hardt, D., and M. Jones, "JSON Web Token Best
Current Practices", BCP 225, RFC 8725,
DOI 10.17487/RFC8725, February 2020,
<https://www.rfc-editor.org/rfc/rfc8725>.
[RFC9110] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
Ed., "HTTP Semantics", STD 97, RFC 9110,
DOI 10.17487/RFC9110, June 2022,
<https://www.rfc-editor.org/rfc/rfc9110>.
5.2. Informative References
[I-D.ietf-oauth-transaction-tokens]
Tulshibagwale, A., Fletcher, G., and P. Kasselman,
"Transaction Tokens", Work in Progress, Internet-Draft,
draft-ietf-oauth-transaction-tokens-11, 30 July 2026,
<https://datatracker.ietf.org/doc/html/draft-ietf-oauth-
transaction-tokens-11>.
[IANA.HTTP.AUTHSCHEMES]
IANA, "Hypertext Transfer Protocol (HTTP) Authentication
Scheme Registry",
<https://www.iana.org/assignments/http-authschemes>.
[IANA.JOSE.ALGS]
IANA, "JSON Web Signature and Encryption Algorithms",
<https://www.iana.org/assignments/jose>.
[IANA.JWT.CLAIMS]
IANA, "JSON Web Token Claims",
<https://www.iana.org/assignments/jwt>.
[IANA.MEDIA.TYPES]
IANA, "Media Types",
<https://www.iana.org/assignments/media-types>.
Campbell & SchwenkschustExpires 28 February 2027 [Page 16]
Internet-Draft WIMSE Workload-Proof-Token August 2026
[IANA.URI.SCHEMES]
IANA, "Uniform Resource Identifier (URI) Schemes",
<https://www.iana.org/assignments/uri-schemes>.
[RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
Framework: Bearer Token Usage", RFC 6750,
DOI 10.17487/RFC6750, October 2012,
<https://www.rfc-editor.org/rfc/rfc6750>.
[RFC7617] Reschke, J., "The 'Basic' HTTP Authentication Scheme",
RFC 7617, DOI 10.17487/RFC7617, September 2015,
<https://www.rfc-editor.org/rfc/rfc7617>.
[RFC9457] Nottingham, M., Wilde, E., and S. Dalal, "Problem Details
for HTTP APIs", RFC 9457, DOI 10.17487/RFC9457, July 2023,
<https://www.rfc-editor.org/rfc/rfc9457>.
Appendix A. Document History
// RFC Editor: please remove before publication.
A.1. draft-ietf-wimse-wpt-02
* Convey the WPT in the Authorization header field with a new WPT
HTTP authentication scheme, replacing the Workload-Proof-Token
header field. Along with this, recommend HTTP status code 401
with a WWW-Authenticate: WPT challenge, remove the ath claim,
rework Section 2.2 since a request has at most one Authorization
header field, move the DPoP specification to the informative
references, and update the examples.
* Editorial: consistent use of "proof of possession"/"PoP", with the
abbreviation expanded on first use, and consistent capitalization
of the defined term "Workload Identifier".
* Advise against logging proof-of-possession values (#271).
* Security Considerations formatting fixup (#217).
* Try to be more clear on how the various token hash claims are done
* Reference the WIT validation procedure in
[I-D.ietf-wimse-workload-creds] (#290).
Campbell & SchwenkschustExpires 28 February 2027 [Page 17]
Internet-Draft WIMSE Workload-Proof-Token August 2026
A.2. draft-ietf-wimse-wpt-01
* Clairify treatment of "jti" claim
* Fix Example WPT Claims to match the example WPT
* Inline the ABNF for the Workload-Proof-Token Header Field
* Add audience security considerations
A.3. draft-ietf-wimse-wpt-00
* Focus on Workload Proof Token (WPT) only.
- Remove credential formats (WIT and WIC)
- Remove HTTP-Message-Signature profile
A.4. draft-ietf-wimse-s2s-protocol-07
* Rework the WPT's oth claim.
* update the media types.
* Discuss extensibility of WIT and WPT.
* Clarify error handling, specifically why not HTTP 401.
* Correct the code examples.
* Add registration request content for a wimse URI scheme.
* New section on key management.
* Use of the Accept-Signature header.
A.5. draft-ietf-wimse-s2s-protocol-06
* Explicit definition of the Workload Identity Certificate.
* Definition of the validation of workload identifiers as part of
workload authentication. Still work in progress.
A.6. draft-ietf-wimse-s2s-protocol-05
* Removed the entire Workload Identity section which is now covered
in the Architecture document.
Campbell & SchwenkschustExpires 28 February 2027 [Page 18]
Internet-Draft WIMSE Workload-Proof-Token August 2026
* Content-Digest is mandatory with HTTP-Sig.
* Some wording on extending the protocol beyond HTTP.
* IANA considerations.
A.7. draft-ietf-wimse-s2s-protocol-04
* Require cnf.jwk.alg in WIT which restricts signature algorithm of
WPT or HTTP-Sig.
* Replay protection as a SHOULD for both WPT and HTTP-Sig.
* Consolidate terminology with the Architecture draft.
A.8. draft-ietf-wimse-s2s-protocol-03
* Consistently use "workload".
* Implement comments from the SPIFFE community.
* Make iss claim in WIT optional and add wording about its relation
to key distribution.
* Remove iss claim from WPT.
* Make jti claim in WIT optional.
* Error handling for the application-level methods.
A.9. draft-ietf-wimse-s2s-protocol-02
* Coexistence with bearer tokens.
* Improve the architecture diagram.
* Some more ABNF.
* Clarified identifiers and URIs.
* Moved an author to acknowledgments.
A.10. draft-ietf-wimse-s2s-protocol-01
* Addressed multiple comments from Pieter.
* Clarified WIMSE identity concepts, specifically "trust domain" and
"workload identifier".
Campbell & SchwenkschustExpires 28 February 2027 [Page 19]
Internet-Draft WIMSE Workload-Proof-Token August 2026
* Much more detail around mTLS, including some normative language.
* WIT (the identity token) is now included in the WPT proof of
possession.
* Added a section comparing the DPoP-inspired app-level security
option to the Message Signature-based alternative.
A.11. draft-ietf-wimse-s2s-protocol-00
* Initial WG draft, an exact copy of draft-sheffer-wimse-s2s-
protocol-00
* Added this document history section
Acknowledgments
The authors would like to thank Pieter Kasselman for his detailed
comments.
We thank Daniel Feldman for his contributions to earlier versions of
this document.
Authors' Addresses
Brian Campbell
Ping Identity
Email: bcampbell@pingidentity.com
Arndt Schwenkschuster
Defakto Security
Email: arndts.ietf@gmail.com
Campbell & SchwenkschustExpires 28 February 2027 [Page 20]